The SunCell® was invented and engineered to harness the clean energy source from the reaction the hydrogen atoms of water molecules to form a non-polluting product, lower-energy state hydrogen called “Hydrino” wherein the energy release of H2O fuel is 100 times that of an equivalent amount of high-octane gasoline at an unprecedented high power density. The compact power is manifest as tens of thousands of Sun equivalents that can be directly converted to electrical output using commercial photovoltaic cells.
Brilliant Light Power, Inc. (BrLP) announced today that it has continuously generated over a million watts of power from a new primary source until the cell vaporized from the intense heat. The power released by the conversion of hydrogen atoms from water molecules in to a lower energy form called “Hydrino” or dark matter is manifest as brilliant-light emitting plasma wherein the light is uniquely and extraordinarily essentially all high-energy light in the extreme ultraviolet. Using four cross-confirming methodologies, five validators have confirmed over a million watts of plasma power developed by BrLP’s so-called SunCell® at power gains of over 100 times the power to ignite the Hydrino reaction, and at power densities higher than any previously known energy source. Dr. Randy Booker, physics professor and former Physics Department Chairman at University of North Carolina-Ashville said, “The power was measured using two optical power measurements involving three sophisticated spectrometers calibrated against a National Institute of Science and Technology traceable standard and two thermal methods involving a commercial calorimeter and the rate of the rise of the water coolant temperature of the SunCell®. All four methodologies cross-confirmed the production of megawatt scale power that was continuous in the case of the SunCell® with spectacular commercial potential. Moreover, the unique and characteristic spectrum from the optical tests of essentially purely high energy light emission over a predicted range confirms the hydrino reaction as the source of the power.”
BrLP subsequently held an invitation demonstration event on June 28, 2016 for about 50 guests from industry and academia wherein BrLP presented live demonstrations of the enormous power density and power gain by multiple methods. BrLP also presented an engineered SunCell® prototype having no moving parts that it believes is capable of producing 125 kW of electricity. BrLP anticipates having field trials in 2017 supported by several current engineering firm and manufacturer partners. It comprises refractory materials capable of the intense heat wherein the SunCell’s® enormous power density heats a blackbody radiator to incandescent temperatures to produce the effect of thousands of halogen light bulbs, and the light is converted to electricity with so-called concentrator photovoltaic cells that receive the light from the blackbody radiator and operate at incident light intensities of over one thousand times that of sunlight. Details of the SunCell®, the BlackLight Process, the video and slide presentation from the June 28, 2016 demonstrations, background theory, journal publications, and other support materials are available on the BrLP webpage (http://brilliantlightpower.com).
BrLP presented live demonstrations of the enormous power density and power gain by multiple methods. BrLP also presented an engineered SunCell® prototype having no moving parts that it believes is capable of producing 125 kW of electricity and is planned to be launched for initial commercialization in 2017.
The power is in bursts of millions of watts in a volume of a coffee cup. Cell meltdown including the thick tungsten electrodes can occur in seconds as shown in the above photo. Five independent validators using four cross confirming methodologies, two absolute spectroscopic and two thermal techniques using a commercial calorimeter and a heat exchanger on the SunCell, have established that the power demonstrated in this video is megawatt level with about 8 kW total input. The vapor is boiled off silver metal having a boiling point temperature of 3924 °F.
BrLP’s safe, non-polluting power-producing system catalytically converts the hydrogen of the H2O-based solid fuel into a non-polluting product, Hydrino, by allowing the electrons to fall to smaller radii around the nucleus. The energy release is over 200 times that of burning the equivalent amount of hydrogen with oxygen. Due to this extraordinary energy release, H2O may serve as the source of hydrogen fuel to form Hydrinos and oxygen. Moreover, the SunCell® is compact, light-weight and autonomous with a projected capital cost of 1% to 10% that of any other form of power. The anticipated cost is so low that BrLP intends to provide autonomous individual power for essentially all stationary and motive applications untethered to the grid or any fuels infrastructure. Dr. Mills announced, “This is the end of the age of fire, the internal combustion engine, and centralized power and fuels.”
“The commercial potential for SunCell® technology is enormous. The promise of a cheap, clean and unlimited source of electric power is on the verge of commercialization. SunCell® components are based on well-known technologies from electrical lighting, photovoltaic, semiconductor, refractory and aerospace industries, and use widely available materials. What is new is Brilliant Light Power’s theoretical and experimental breakthroughs, protected by patents and proprietary know-how. Albert Einstein is looking down, smiling: I told you so, He does not play dice”, said Former World Bank manager Gerhard Pohl. Dr. Joseph Renick, former Chief Scientist at Applied Research Associates added, “It is understandable why even the best of scientists have difficulty taking seriously that which has been accomplished by Dr. Mills and his team at Brilliant Light Power because of how completely it transforms our understanding of atomic and molecular structure, dispels of all the strangeness associated with quantum theory so cherished by quantum physicists and chemists and then to boot delivers to mankind a new source of essentially unlimited inexpensive clean energy. The novel techniques, materials and processes developed by BrLP in the last few years are making this new source of energy a reality for all of mankind. The rest, however painful it will be for many in the natural sciences, will follow.”
One of the validators, Bucknell Professor Dr. Peter Mark Jansson PE remarked, “An objective review of the progress BrLP has made over the past decade in the development of their proprietary hydrogen-based technology indicates that they have achieved an understanding of the fundamental parameters that must be controlled to create a sustainable and energetic reaction of their atomic hydrogen fuel and catalysts. They have made landmark progress in creating demonstration devices that prove the concept of their generation technology with promise of becoming continuously operating prototypes in the near future. The creation of these consistently replicable experiments where input power is multiplied by 65 to 150 times is a remarkable achievement. The input power for these respective experiments was 8.02 kW and 10.45 kW with corresponding output power peaks reaching as high as 521 kW and 1.56 MW. Although these energy bursts were on the order of 1 to 3 minutes in duration I was able to observe a more continuous, sustainable reaction experiment that lasted over 7 minutes, other validators were able to observe operating SunCells® for over 30 minutes in duration.” Dr. K.V. Ramanujachary, Rowan University Meritorious Professor of Chemistry and Material Science, added that from his independent tests he finds “the developments truly impressive and extremely important. I believe that the technology is amenable for making large-scale devices as easily as a portable one. This is what makes it very attractive.”
SOURCE - Blacklight power