General Fusion targets prototype by 2015 and a working reactor by 2020

Canadian Manufacturing has an article covering General Fusion. General Fusion is creating a prototype and subsystems at full scale. They have made a full scale plasma injector that create the magnetized targets and individual full scale pistons. They have made a one meter diameter sphere with 14 pistons to demonstrate the symmetry of the compression.

They recently closed on another round of funding for $19.5 million

Magnetized Target Fusion is a fusion concept that first showed promise in the 1970s, but has gone mostly unexplored in recent years. General Fusion believes that a power plant based on its technology could be built at a much lower cost than using conventional magnetic and laser fusion approaches. Such a power plant would make fusion a commercially viable clean power source. This funding round comes on the heels of General Fusion achieving the first milestone in its Sustainable Development Technology Canada (SDTC) project, undertaken in collaboration with Los Alamos National Laboratory.

More General Fusion Background

Michel Laberge knew he couldn’t beat the existing multibillion-dollar fusion labs at their own game. So instead, he decided to combine ideas from the two current approaches to make a vastly cheaper machine

Canadian startup General Fusion has designed a machine to generate fusion power by smashing together two variants of hydrogen atoms: deuterium, which has one neutron and one proton, and tritium, which has two neutrons and one proton.

The result: helium gas (which will get released into the atmosphere) and vast amounts of energy, which will get captured and turned into electricity. The company is still constructing its prototype. Here’s how it’s supposed to work.

Getting Started

1. Two large injectors heat the deuterium and tritium gas to 1 million degrees Celsius, turning it into plasma, an electrically charged gas.

2. Puffs of the plasma are shot into the center of a spherical tank filled with spinning, molten lead.

3. The spinning vortex of metal creates magnetic fields that trap the plasma in the center of the sphere.

Creating The Fusion Reaction

4. About 200 pneumatic pistons cover the outside of the sphere. The pistons strike the tank at exactly the same time, creating a shock wave in the liquid metal. This shock wave compresses the plasma in the center.

5. The compression raises the temperature to 150 million degrees Celsius, creating the right conditions for fusion.

Capturing Energy, Generating Electricity

6. The energy released from the fusion gets absorbed into the swirling lead, causing it to heat up. The hot lead is piped away to a heat exchanger, where it boils water into steam. The steam then turns a turbine, generating electricity.

“Other fusion uses a very complex way of producing energy — superconducting magnets, laser beams, all sorts of expensive and complicated and pricey stuff,” he says. “It costs them billions and billions of dollars, so it’s not so practical in my opinion. Here, what the energy source is, is compressed air. Compressed air is dirt cheap.”

Think of his idea as a one-two punch. His big electrical gizmo starts to heat up the atoms. Those get injected into a 10-foot-wide sphere full of swirling molten lead.

“The liquid will be circulated with a pump, so it spins around and makes a vortex in the center. You know, like your toilet with a hole in the center,” Laberge says.

And just as the heated atoms get into the center, Laberge fires 200 pistons, powered with compressed air, which surround the sphere. “Those are compressed air guns … that send a big compression wave, squash the thing, and away you go!”

Banks of capacitors are a key part of General Fusion’s machine. The capacitors, which charge up and release bursts of electricity, will be used to heat gases to 1 million degrees Celsius in preparation for a fusion reaction.

“Just in the last year I heard it reported from some technical meetings that China has gotten interested in magnetized target fusion,” Richard Siemon (used to run the fusion program at Los Alamos National Laboratory) notes. China could easily throw hundreds of millions of dollars at the idea. So venture capitalists could have some serious competition. Laberge, of course, is betting he will emerge victorious.

I covered their patent when I first started covering General Fusion

I have hundreds of articles on all kinds of nuclear fusion approaches. I cover the work towards energy generation and nuclear fusion for space propulsion. I cover Japans muon fusion work, I cover Star Scientifics work, Tri-alpha Energy, IEC fusion (EMC2), focus fusion (lawrenceville plasma physics, NASA Chapman high repetition laser approach, Helion energy and other approaches from John Slough, etc…)

I just do not always cover all the background every time I update one of the projects that I am tracking. They are all available from the tags and by searching my site.

About 20 articles on General Fusion going back about 6 years.

My articles for more background on the overall general fusion work

Tracking progress on General Fusion and other approaches

If you liked this article, please give it a quick review on ycombinator or StumbleUpon. Thanks