Supersonic Electric Passenger Planes

Aviation talks about a patent for a VTOL supersonic plane. Richard Lugg is the man behind the HyperMach [Mach 4 cruise] SonicStar supersonic business jet concept. HyperMach’s design has supersonic laminar flow, plasma drag and boom reduction, and superconducting electric propulsion. Lugg’s name appears on a new US patent (8,636,241, filed in 2006) for a hybrid jet/electric VTOL aircraft.

Elon Musk, the billionaire behind PayPal and SpaceX, has suggested that his next big project could be a supersonic vertical take-off passenger jet.

There is battery technology which would greatly increase the energy density (watt hours per kilogram) of batteries. This will make the supersonic electric passenger plane feasible.

Patent 8636241 – A fixed-wing VTOL aircraft features an array of electric lift fans distributed over the surface of the aircraft. A generator is (selectively) coupled to the gas turbine engine of the aircraft. During VTOL operation of the aircraft, the engine drives the generator to generate electricity to power the lifting fans. Power to the lifting fans is reduced as the aircraft gains forward speed and is increasingly supported by the wings.

The design uses electric-powered lifting fans in the wing roots and canard foreplanes for vertical flight. The fans are powered by electricity generated by turbofans, which provide propulsion in forward flight. In vertical flight, residual thrust from the turbofans is vectored downwards to supplement lift from the fans. In forward flight, all engine power goes to thrust and louver doors close over the fans.

How much engine thrust needs to be vectored depends on the power of the lifting fans, which can range from 25% to 100% of the lift needed for VTOL, the patent says. The advantage of the fans is their exhaust flow is at ambient temperate and low velocity. The power extracted from the turbofans to generate electricity also reduces the temperature and velocity of the vectored engine thrust, allowing the aircraft to operate from unprepared surfaces.

HyperMach

In 2013, HyperMach was reported to be talking to two or three aircraft manufacturers about the production of the SonicStar.

“We are now speaking to one US manufacturer and another manufacturer outside of the US,” said Richard Lugg, CEO. “We are also speaking to an Asian manufacturer, although that has not progressed to a face-to-face meeting as of yet.”

Having made some changes to the aircraft in the last couple of years, the original entry date has now been pushed back from 2021 to June 2024.

“We have made some improvements in the turbine, where we generate the power, says Lugg. “We have increased the maximum capacity from 24 to 32 and brought the cruising speed up to around 3000mph.”

HyperMach is designed to be a fully integrated hybrid supersonic, non-afterburning engines, hybrid aerodynamic double delta supersonic laminar flow wing design, pressurized cabin to 84,000 ft, custom-luxury cabin and pilot deck, 6000 nautical miles IFR capable range, Jet-A, JP-4 and JP-7 fuel capable, electromagnetic drag reduction technology affording dramatic reduction/elimination of sonic boom below 0.25 lbs/sq.ft., overland Mach 4.0 cruise.

Operational requirements; Hot and High altitude day conditions and landing distance 4800 ft, Class 4 operational acoustics condition compatible,

Performance requirements (Mach 4.0 / 10 – 20 passengers, 60,000 ft)

The HyperMach website has full details on the Mach 4 business jet design.

HyperMach Engine / Propulsion System

The SonicBlue vision is the development of revolutionary engine design to fundamentally change the way aero gas-turbine engines operate in order to significantly improve the performance of aircraft systems.

* Hybrid engine technology developed to offer a highly efficient, supersonic, variable bypass fan ratio engine design.
* The engine operates electrically by generating a large amount of on-board electric power through its superconducting electric turbine ring generator system.
* Engine produces sufficient power to operate the multi-stage counter rotating, superconducting, dual ring motor electric bypass fans and superconducting electric ring motor axial compressor, power generation and thrust comes from 5-stage superconducting axial turbine.
* The 54,700 thrust class S-MAGJET engine (two engines) described is optimized to fly the HyperMach SonicStar aircraft at 62,000 ft, at a specific fuel consumption below 1.05 at Mach 3.3, this performance will be unprecedented and will welcome in a new era of the future of aerospace transport.
* Electrical generation is provided by superconducting ring generators that are powered by the high velocity exhaust thrust from the combustor section of the engine.
* The bypass fan is a twin fan system in which one fan counter rotates with the other fan, which reduces aerodynamic swirl and drag.
* The bypass fan configuration is not constrained by a drive shaft, heavy gears and complex gear boxes, nor complex lubrication systems and it can be run at an optimal rotational speed so as to maximize its efficiency at any aircraft velocity, or altitude.
* The bypass fans running independently from the compressor can be run at much slower speeds than the compressor, this means a more efficient RPM for the fan blade design of the S-MAGJET, a low bypass fan supersonic engine design.
* Lower operating RPM speeds afford the use of wider blades, raising aerodynamic efficiency and thrust per horsepower, making the engine architecture greatly more efficient than the current art of engine designs.
* Light weight superconducting ring motors with integrated cooling for the compressor do not require a drive shaft, nor the bypass fans or the superconducting ring generators of the power turbine, a “hollow-core shaft-less” tunnel is left in the center of the hybrid electric turbine which now carries additional bypass air.
* Bypass air as the major component of thrust, rather than the hot exhaust from the power turbine being utilized as thrust is a more efficient method of producing thrust for propulsion in turbines.
* Supersonic-Magnetic Advanced Generation Jet Electric Turbine (S-MAGJET), the majority of electric power produced off the power turbine via the superconducting ring generators is directed forward through a proprietary electric power management system to run the electric bypass fans and the electric compressor. This electrical independence of the bypass fan from the multi-stage axial compressor raises overall efficiency of the engine by 70% alone.

Other discussions of Supersonic electric planes

EVWorld discusses the feasibility of supersonic electric passenger planes.

Faster Supersonic Flight

The electrically powered engine that could theoretically propel an aircraft to a flight speed of Mach 1.5 could be modified to operate at higher speed. The engine intake would be modified to an “Oswatitsch” design with variable geometry. That design would generate (weaker) oblique shock waves at the entrance to the engine as well as be able to “dump” excess air or duct in extra air depending on flight conditions.

The faster engine may use a single-spool axial flow compressor that has more pressure ratio (up to 15 to 1 with variable stator blades) to raise air temperature. The aircraft may carry water in special tanks and electrolysis gear to generate hydrogen that may be injected ahead of the nozzle of the engine. The combustion of the hydrogen would increase the air temperature and raise the exit velocity of the gas that leaves the engine. Flight speeds of Mach 2 to Mach 2.4 may be possible.

VTOL in Fiction

There have been vertical takeoff landing (VTOL) planes in fiction.

Avengers Quinjet is VTOL but no mention of it being an electric plane. It is supersonic

The “Bus” is a VTOL plane used in the TV show Marvel Agents of Shield. But it appears to be a subsonic C17 with VTOL. Again no mention that it is electric powered.