MFMP project publishes recipe for excess heat with low energy nuclear reactions aka cold fusion

On the LENR forum the MFMP project has published 18 steps for getting excess heat with low energy nuclear reactions (LENR aka cold fusion)

1. Bake Ni
2. Reduce Ni
3. Hydrogenate Ni
4. Mix: Ni + LiAlH4 + Li
5. Bake and vac reactor, add Nickel, vac warm, add H2, Vac
6. Heat to above Mossbauer determined Ni Debye (say 135C), pressure regulated to approx 1bar abs.
7. Hold, pressure regulated to approx 1bar abs.
8. Heat slowly to as close to Ni Curie as comfortable (Say 340C), pressure regulated to approx 1bar abs.
9. Hold, pressure regulated to approx 1bar abs.
10. Slowly lower temp to above highest known Ni Debye (Say 220C), pressure regulated to approx 1bar abs.
11. Hold, pressure regulated to approx 1bar abs.
12. Go as fast as possible through Ni Curie
13. Hold, pressure regulated to approx 0.5bar abs.
14. Cycle through 500C internal, pressure regulated to approx 0.5bar abs.
15. Hold, pressure regulated to approx 0.5bar abs.
16. Raise internal temperature to over 1200, pressure regulated to approx 0.5bar abs.
17. Drop to around 1000 and hold, pressure regulated to approx 0.5bar abs.
18. Raise internal temperature to near boiling point of Lithium
1h Thermal > x/β- emissions > Pb > IR/THz > 5h (SSM) where ‘>’ means ‘leads to’

About The Author

Add comment

E-mail is already registered on the site. Please use the Login form or enter another.

You entered an incorrect username or password

Sorry, you must be logged in to post a comment.

MFMP project publishes recipe for excess heat with low energy nuclear reactions aka cold fusion

On the LENR forum the MFMP project has published 18 steps for getting excess heat with low energy nuclear reactions (LENR aka cold fusion)

1. Bake Ni
2. Reduce Ni
3. Hydrogenate Ni
4. Mix: Ni + LiAlH4 + Li
5. Bake and vac reactor, add Nickel, vac warm, add H2, Vac
6. Heat to above Mossbauer determined Ni Debye (say 135C), pressure regulated to approx 1bar abs.
7. Hold, pressure regulated to approx 1bar abs.
8. Heat slowly to as close to Ni Curie as comfortable (Say 340C), pressure regulated to approx 1bar abs.
9. Hold, pressure regulated to approx 1bar abs.
10. Slowly lower temp to above highest known Ni Debye (Say 220C), pressure regulated to approx 1bar abs.
11. Hold, pressure regulated to approx 1bar abs.
12. Go as fast as possible through Ni Curie
13. Hold, pressure regulated to approx 0.5bar abs.
14. Cycle through 500C internal, pressure regulated to approx 0.5bar abs.
15. Hold, pressure regulated to approx 0.5bar abs.
16. Raise internal temperature to over 1200, pressure regulated to approx 0.5bar abs.
17. Drop to around 1000 and hold, pressure regulated to approx 0.5bar abs.
18. Raise internal temperature to near boiling point of Lithium
1h Thermal > x/β- emissions > Pb > IR/THz > 5h (SSM) where ‘>’ means ‘leads to’

About The Author

MFMP project publishes recipe for excess heat with low energy nuclear reactions aka cold fusion

On the LENR forum the MFMP project has published 18 steps for getting excess heat with low energy nuclear reactions (LENR aka cold fusion)

1. Bake Ni
2. Reduce Ni
3. Hydrogenate Ni
4. Mix: Ni + LiAlH4 + Li
5. Bake and vac reactor, add Nickel, vac warm, add H2, Vac
6. Heat to above Mossbauer determined Ni Debye (say 135C), pressure regulated to approx 1bar abs.
7. Hold, pressure regulated to approx 1bar abs.
8. Heat slowly to as close to Ni Curie as comfortable (Say 340C), pressure regulated to approx 1bar abs.
9. Hold, pressure regulated to approx 1bar abs.
10. Slowly lower temp to above highest known Ni Debye (Say 220C), pressure regulated to approx 1bar abs.
11. Hold, pressure regulated to approx 1bar abs.
12. Go as fast as possible through Ni Curie
13. Hold, pressure regulated to approx 0.5bar abs.
14. Cycle through 500C internal, pressure regulated to approx 0.5bar abs.
15. Hold, pressure regulated to approx 0.5bar abs.
16. Raise internal temperature to over 1200, pressure regulated to approx 0.5bar abs.
17. Drop to around 1000 and hold, pressure regulated to approx 0.5bar abs.
18. Raise internal temperature to near boiling point of Lithium
1h Thermal > x/β- emissions > Pb > IR/THz > 5h (SSM) where ‘>’ means ‘leads to’

About The Author