University of Washington develops passive Wi-Fi that uses 10,000 times less power and should be commercially available by 2018-2019

A team of University of Washington computer scientists and electrical engineers has demonstrated that it’s possible to generate Wi-Fi transmissions using 10,000 times less power than conventional methods.

The new Passive Wi-Fi system also consumes 1,000 times less power than existing energy-efficient wireless communication platforms, such as Bluetooth Low Energy and Zigbee. A paper describing those results will be presented in March at the 13th USENIX Symposium on Networked Systems Design and Implementation.

“We wanted to see if we could achieve Wi-Fi transmissions using almost no power at all,” said co-author Shyam Gollakota, a UW assistant professor of computer science and engineering. “That’s basically what Passive Wi-Fi delivers. We can get Wi-Fi for 10,000 times less power than the best thing that’s out there.”

Prototype hardware has been buit and implements all four 802.11b bit rates on an FPGA platform. Their experimental evaluation shows that passive Wi-Fi transmissions can be decoded on off-the-shelf smartphones and Wi-Fi chipsets over distances of 30 – 100 feet in various line-of-sight and through-the-wall scenarios. Finally, we design a Passive Wi-Fi IC that shows that 1 and 11~Mbps transmissions consume 14.5 and 59.2 µW respectively. This translates to 10000x lower power than existing Wi-Fi chipsets and 1000x lower power than Bluetooth LE and ZigBee.

Jeeva Wireless is commercializing the technology

In Passive Wi-Fi, power-intensive functions are handled by a single device plugged into the wall. Passive sensors use almost no energy to communicate with routers, phones and other devices.

Passive Wi-Fi can for the first time transmit Wi-Fi signals at bit rates of up to 11 megabits per second that can be decoded on any of the billions of devices with Wi-Fi connectivity. These speeds are lower than the maximum Wi-Fi speeds but 11 times higher than Bluetooth.

Aside from saving battery life on today’s devices, wireless communication that uses almost no power will help enable an “Internet of Things” reality where household devices and wearable sensors can communicate using Wi-Fi without worrying about power.

To achieve such low-power Wi-Fi transmissions, the team essentially decoupled the digital and analog operations involved in radio transmissions. In the last 20 years, the digital side of that equation has become extremely energy efficient, but the analog components still consume a lot of power.

The Passive Wi-Fi architecture assigns the analog, power-intensive functions – like producing a signal at a specific frequency — to a single device in the network that is plugged into the wall.

An array of sensors produces Wi-Fi packets of information using very little power by simply reflecting and absorbing that signal using a digital switch. In real-world conditions on the UW campus, the team found the passive Wi-Fi sensors and a smartphone can communicate even at distances of 100 feet between them.

“All the networking, heavy-lifting and power-consuming pieces are done by the one plugged-in device,” said co-author Vamsi Talla, an electrical engineering doctoral student. “The passive devices are only reflecting to generate the Wi-Fi packets, which is a really energy-efficient way to communicate.”

Because the sensors are creating actual Wi-Fi packets, they can communicate with any Wi-Fi enabled device right out of the box.

“Our sensors can talk to any router, smartphone, tablet or other electronic device with a Wi-Fi chipset,” said co-author and electrical engineering doctoral student Bryce Kellogg. “The cool thing is that all these devices can decode the Wi-Fi packets we created using reflections so you don’t need specialized equipment.”

The technology could enable entirely new types of communication that haven’t been possible because energy demands have outstripped available power supplies. It could also simplify our data-intensive worlds.

For instance, smart home applications that use sensors to track everything from which doors are open to whether kids have gotten home from school have typically used their own communication platforms because Wi-Fi is so power-hungry.

“Even though so many homes already have Wi-Fi, it hasn’t been the best choice for that,” said co-author Joshua Smith, UW associate professor of computer science and engineering and of electrical engineering. “Now that we can achieve Wi-Fi for tens of microwatts of power and can do much better than both Bluetooth and ZigBee, you could now imagine using Wi-Fi for everything.”